Construction hoist
Configuration summary
Inclined hoist running at 15° or 30° along bridge pylons and dam faces, 2 × 2,000 kg, 30 m/min. Request the specification sheet, drawings and a delivered price — reply within one working day.
- Model
- SCD200/200 Inclined Construction Hoist
- Series
- Curved & inclined
- Design standard
- GB/T 10054 · JGJ 215
- Mast section
- 650 × 650 × 1508 mm
- Packing
- Steel frame, 40HQ
- Warranty
- 12 months on main parts
Final specifications are confirmed on the project configuration sheet.
Bridge pylons and dam faces are climbed at an angle. The SCD series tilts the cage, the drive and the safety device together so the rack engagement stays correct on the slope.
Key features
- 15° / 30° standard inclinations
- Inclined anti-fall device and brake
- Cage floor kept level for passengers
- Custom angles available
Specifications
| Rated load | 2 × 2,000 kg |
|---|---|
| Lifting speed | 30 m/min |
| Inclination | 15° / 30° (others on request) |
| Max. travel | 100 m |
| Cage size | 3.0 × 1.4 × 2.4 m |
| Motor power | 3 × 11 kW |
| Guide system | Inclined roller guide |
| Safety device | SAJ40, inclined type |
Typical applications
Cable-stayed bridge pylons, arch bridges, dam faces, inclined shafts.
Specifications are confirmed on the project configuration sheet. Send your building height and payload for a tailored quotation.
How the hoist is packed and shipped
Cages and mast sections are packed in welded steel frames, electrical parts in plywood cases, and the whole set is loaded into 40HQ containers at Qingdao port.
- Cage and drive unit in a steel frame
- Mast sections bundled by length
- Electrical cabinet in a sealed case
- Loading plan and packing list provided
FOB Qingdao
CIF / CFR
40HQ / 40GP
20GP
Before you order
What is the difference between the SC and SS series?
The SC series is a rack-and-pinion hoist with a cage, used to carry people and materials; the SS series is a material hoist with a platform or bucket, intended for goods only. SC units need a proper foundation, tie-ins and an operator; SS units are lighter and cheaper to install.
How high can a single hoist run?
Standard SC200/200 configurations reach 200 m with 650×650×1508 mm mast sections and tie-ins every 6–9 m. Beyond that we supply dual-drive units and project-specific tie-in calculations.
Which documents come with the shipment?
Each order includes the foundation drawing, mast and tie-in layout, electrical schematic, operation and maintenance manual, and the safety device certificate — in English as standard.